Our SMNF replacement neck for Stratocaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. From the smaller vintage frets all the way down to the nitrocellulose laquer, the SMNF is our take on the necks that came on the original Stratocaster®. A true gem for those seeks the full look and feel of a vintage guitar!SpecificationsFrets: 21 Vintage frets (0.079" x 0.043") Wood: One-piece MapleNeck Profile Shape: C Finish: Polyurethane base (1 coat) with tinted nitrocellulose lacquer topcoatFretboard Radius: 7.25" Inlays: Black fretboard and side marker dotsNut Width: 1-5/8"Heel Width: 2-3/16"Tuning Peg Holes: Vintage 2-step hole0.34" (8.5mm) bushing-hole diameter0.25" (6.5mm) post-hole diameterTruss Rod Adjustment Location: HeelNeck Thickness:0.86" at first fret0.96" at twelfth fretImportant NotesWood grain varies from neck to neck. Your neck may differ slightly from what is pictured.All necks have a limited lifetime warranty against defects in materials and workmanship.All necks may require fret leveling and polish. This is normal and not a defect.To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.This neck is licensed to Allparts Music Corporation by Fender ® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender ® and no Fender ® warranty applies.